The ultimate laser tripwire system with four laser sets and wireless control !!!
Our prices now include taxes and shipping costs (Post). If you wish to purchase several items, please send a message through our contact page. You'll speak to a real person, and we can offer you a single shipping price will lower your overall costs, and save you money! Responses will be prompt!
This listing is from one of our latest kickstarter campaigns. We were successful in reaching our goal. It was designed for escape rooms, laser tag arenas, paintball arenas, etc. This laser tripwire set has four different programs, and three sub programs that are easy to choose from. You can connect it to your Arduino, or you can simply use it as a laser grid tripwire module. There are two tripwire modes of operation, and two Arduino compatible modes of operation. Needless to say, there is a lot of information to cover. The video above is a full video manual. The video below is a bit more glamorous in how it shows off this unit as a whole. This unit has wireless control, so that you can arm and disarm the unit through a wireless transmitter key-fob that is included with this listing. We are selling two variations of this set. This variation (Version#2) is the most expensive set, but it comes with FOUR laser/mount/regulator sets. Version#1 comes with only one of these sets. This listing (Version#2) is more expensive, but it comes with a heck of a lot more hardware!
When you purchase version#2 (This listing), you will receive the following:
1) A fully assembled and tested processor board with the wireless receiver soldered into place
2) A wireless transmitter key-fob for wireless arming and disarming
3) 4x Laser regulator boards (assembled and tested)
4) 4x High quality 3v lasers
5) 4x Adjustable laser mount sets with adjustment/mounting hardware
6) 5x AC adapters
7) 6x female-female wire connectors to connect to an external circuit
8) 1x Loud siren
Some Preliminary Things To Note:
1) These devices comes assembled, but without a casing. It is up to the user to mount both the processor board, the regulator boards and the loud siren. The processor board, the regulator boards, and the loud siren each have mounting holes for easy installation. As well, the siren has the option of using a two-sided tape strip on the back of the siren. Simply remove the protective layer, and stick your siren to your project box.
2) A solid 9-12v power supply is required. An AC-DC adapter is provided for the processor board, and 4x AC adapters are included for the four included regulator boards. If you choose to use your own power supply, and the supply voltage at the input drops below 7v, the device will likely have issues when the siren is enabled.
How Do I Use It???
While this unit is extremely easy to use, we've created a written user manual, and several videos to showcase everything. The video above gives a full demonstration in great detail. The Written manual gives a ton of information in written form. There are also lots of diagrams. If after you watch the video above, you have questions, please feel free to consult with the written manual, or simply send us a question. We'll make sure to answer promptly.
Written Manual: http://www.engineeringshock.com/the-multi-program-laser-tripwire-manual.html
If you have any questions at all, please send us a message through our contact page! We will get back to you promptly!
Disclaimer:
This prop module was created specifically to enhance your tactical gaming experience. Engineeringshock Electronics, paintballprops.com, and any affiliates of Engineeringshock Electronics will not be held accountable for losses or consequences caused by the misuse of this product, or any of our products. Furthermore, we will not offer servicing on products that have been modified in any way. By purchasing this product, you are agreeing to the above statement. Engineeringshock Electronics, paintballprops.com, and any affiliates of Engineeringshock Electronics prohibit the re-sale of this product, or any of our products. This product has been designed for the specific use of applications and may not be used for unlawful purposes, uses that are expressly prohibited under the terms, conditions and purpose of its use and diversion contrary to U.S. export laws. No guarantees are given or implied as to the product efficiency and performance. Company, its consultants, partners, agents and employees shall not be liable for any claims, losses, expenses, injuries, or damages arising from or related to the product
When you purchase version#2 (This listing), you will receive the following:
1) A fully assembled and tested processor board with the wireless receiver soldered into place
2) A wireless transmitter key-fob for wireless arming and disarming
3) 4x Laser regulator boards (assembled and tested)
4) 4x High quality 3v lasers
5) 4x Adjustable laser mount sets with adjustment/mounting hardware
6) 5x AC adapters
7) 6x female-female wire connectors to connect to an external circuit
8) 1x Loud siren
Some Preliminary Things To Note:
1) These devices comes assembled, but without a casing. It is up to the user to mount both the processor board, the regulator boards and the loud siren. The processor board, the regulator boards, and the loud siren each have mounting holes for easy installation. As well, the siren has the option of using a two-sided tape strip on the back of the siren. Simply remove the protective layer, and stick your siren to your project box.
2) A solid 9-12v power supply is required. An AC-DC adapter is provided for the processor board, and 4x AC adapters are included for the four included regulator boards. If you choose to use your own power supply, and the supply voltage at the input drops below 7v, the device will likely have issues when the siren is enabled.
How Do I Use It???
While this unit is extremely easy to use, we've created a written user manual, and several videos to showcase everything. The video above gives a full demonstration in great detail. The Written manual gives a ton of information in written form. There are also lots of diagrams. If after you watch the video above, you have questions, please feel free to consult with the written manual, or simply send us a question. We'll make sure to answer promptly.
Written Manual: http://www.engineeringshock.com/the-multi-program-laser-tripwire-manual.html
If you have any questions at all, please send us a message through our contact page! We will get back to you promptly!
Disclaimer:
This prop module was created specifically to enhance your tactical gaming experience. Engineeringshock Electronics, paintballprops.com, and any affiliates of Engineeringshock Electronics will not be held accountable for losses or consequences caused by the misuse of this product, or any of our products. Furthermore, we will not offer servicing on products that have been modified in any way. By purchasing this product, you are agreeing to the above statement. Engineeringshock Electronics, paintballprops.com, and any affiliates of Engineeringshock Electronics prohibit the re-sale of this product, or any of our products. This product has been designed for the specific use of applications and may not be used for unlawful purposes, uses that are expressly prohibited under the terms, conditions and purpose of its use and diversion contrary to U.S. export laws. No guarantees are given or implied as to the product efficiency and performance. Company, its consultants, partners, agents and employees shall not be liable for any claims, losses, expenses, injuries, or damages arising from or related to the product
