The Human Connection MARK II - Escape Room Prop Game
This is the second version of our human connection prop. This Human Connection escape room prop has two basic requirements: First things first, players need to acquire a key, which they will need to insert into the key switch slot, and turn. This will activate the prop. While the key is inserted, and turned to the right, the prop will be active. From there, people to connect one conductive pad to another by holding hands! When the hand of one player touches and holds one conductive plate, and the last person in the daisy-chain touches and holds the secondary plate several metres away, the included electromagnetic lock will unlock. As soon as the human connection is removed, the lock magnetises again. Please take the time to watch the above video demonstration. We can customise this unit to work perfectly for your escape room application. If that interests you, please contact us through our Contact Us Page.
How does it work?
This prop utilises 12 volts DC one one of the conductive pads, and 0 volts on the secondary conductive pad. The participants act as the wire that connect the two together. The resistance of human skin is very high, which means that the current sourced across several humans extremely low. The two probes that come with this set have alligator clips connected to them. They do not need to be connected to the included copper pads. They can be connected to any clean conductive metal surface.
What comes with this prop?
1x Electromagnetic lock with bracket and mounting hardware. Please see the electromagnet mounting video below.
1x Control Board
1x Key switch module on a 1.5m extension with a mounting nut and two keys.
2x 1.5 Metre Connection Probes with Alligator Clips
1x 12VDC 1A AC-DC Wall Adaptor
2x Conductive Copper Plates
The Probes, and Electromagnet will both be connected to the control board prior to shipping. If you have any questions at all about this product after watching both of the videos in this listing, then please do not hesitate to contact us through our contact page. We will answer you promptly! Thank you for taking an interest in our props!
Here is a video that shows you how to mount the electromagnetic lock!:
How does it work?
This prop utilises 12 volts DC one one of the conductive pads, and 0 volts on the secondary conductive pad. The participants act as the wire that connect the two together. The resistance of human skin is very high, which means that the current sourced across several humans extremely low. The two probes that come with this set have alligator clips connected to them. They do not need to be connected to the included copper pads. They can be connected to any clean conductive metal surface.
What comes with this prop?
1x Electromagnetic lock with bracket and mounting hardware. Please see the electromagnet mounting video below.
1x Control Board
1x Key switch module on a 1.5m extension with a mounting nut and two keys.
2x 1.5 Metre Connection Probes with Alligator Clips
1x 12VDC 1A AC-DC Wall Adaptor
2x Conductive Copper Plates
The Probes, and Electromagnet will both be connected to the control board prior to shipping. If you have any questions at all about this product after watching both of the videos in this listing, then please do not hesitate to contact us through our contact page. We will answer you promptly! Thank you for taking an interest in our props!
Here is a video that shows you how to mount the electromagnetic lock!:
