The "Secret Knock" Electronic Escape Room Prop With Electromagnetic Lock!
Our prices now include taxes and shipping costs (Post). If you wish to purchase several items, please send a message through our contact page. You'll speak to a real person, and we can offer you a single shipping price will lower your overall costs, and save you money! Responses will be prompt!
This "Secret Knock" prop is extremely easy to use, and comes to you fully assembled. If you wish for us to extend the electromagnetic lock wiring, we can do that. You just need to request this of us. When you purchase this listing, you will receive the following:
1) 1x Fully assembled "Secret Knock" board
2) 2x Piezo vibration sensor elements (One comes connected to the main board)
3) 1x Key switch with cable and 2x keys
4) 1x 12v Electromagnetic Lock module, with bracket and mounting hardware
5) 1x 12v 2A AC-DC power supply adaptor
Everything comes fully assembled, and tested.
How it works:
The video above offers a complete demonstration of how this unit works, but here is a quick rundown.
1) On power up, the red "NO" LED turns on for a short period of time, and then turns off. At this time, you can program in your own knock. You can program in a secret knock that is comprised of one to nine knocks. Please note that the higher the number, the more complicated the knock will be to replicate. Once you've programmed in your knock, the blue "YES" LED will flash. At this point, your knock will be saved until you power off.
2) The flat piezo element must be adhered to the knocking surface if your choice. Hot glue, or epoxy should do the trick. When the unit registers a knock, the on board green "HT" LED will flash. The "HT" LED is simply a visual "knock" indicator.
3) After the secret knock has been saved, if the unit detects an incorrect knock, then the "NO" LED will flash. Once the "NO" LED stops flashing, the unit is ready for another knock. If the unit detects a correct knock, then the "YES" LED turns on momentarily, and then the electromagnetic lock will demagnetise, and your door, or secret compartment will open. There is a video that talks about the electromagnetic lock below.
4) When the electromagnetic lock is deactivated, the blue "YES" LED will start flashing. It will continue to flash until a key is placed into the key switches, and turned right, then left again. At this point, the program will reset, and the magnetic lock will energise again. The programmed knock will still be saved in memory. If you wish to program in a new knock, remove power, then wait ten seconds, then power up again. This will allow for you to program in a new knock.
If you have any questions at all, send us a message, and we'll get back to you promptly.
Thank you for taking an interest in our escape room props! Here is a video that talks more about the included electromagnetic lock module:
1) 1x Fully assembled "Secret Knock" board
2) 2x Piezo vibration sensor elements (One comes connected to the main board)
3) 1x Key switch with cable and 2x keys
4) 1x 12v Electromagnetic Lock module, with bracket and mounting hardware
5) 1x 12v 2A AC-DC power supply adaptor
Everything comes fully assembled, and tested.
How it works:
The video above offers a complete demonstration of how this unit works, but here is a quick rundown.
1) On power up, the red "NO" LED turns on for a short period of time, and then turns off. At this time, you can program in your own knock. You can program in a secret knock that is comprised of one to nine knocks. Please note that the higher the number, the more complicated the knock will be to replicate. Once you've programmed in your knock, the blue "YES" LED will flash. At this point, your knock will be saved until you power off.
2) The flat piezo element must be adhered to the knocking surface if your choice. Hot glue, or epoxy should do the trick. When the unit registers a knock, the on board green "HT" LED will flash. The "HT" LED is simply a visual "knock" indicator.
3) After the secret knock has been saved, if the unit detects an incorrect knock, then the "NO" LED will flash. Once the "NO" LED stops flashing, the unit is ready for another knock. If the unit detects a correct knock, then the "YES" LED turns on momentarily, and then the electromagnetic lock will demagnetise, and your door, or secret compartment will open. There is a video that talks about the electromagnetic lock below.
4) When the electromagnetic lock is deactivated, the blue "YES" LED will start flashing. It will continue to flash until a key is placed into the key switches, and turned right, then left again. At this point, the program will reset, and the magnetic lock will energise again. The programmed knock will still be saved in memory. If you wish to program in a new knock, remove power, then wait ten seconds, then power up again. This will allow for you to program in a new knock.
If you have any questions at all, send us a message, and we'll get back to you promptly.
Thank you for taking an interest in our escape room props! Here is a video that talks more about the included electromagnetic lock module:
